What this council is deciding, how quickly, and how often it says yes.
2,533
Applications tracked
all time
525
Last 90 days
up 28% on the previous 90 days
95
Open for comment
you can still have your say
79%
Approval rate
of 1,879 decided applications
Reading the approval rate
A follow-up to an existing permission · the principle is already approved, so only the detail is under consideration
Single storey rear extension (max 6m deep and max 3.5m high) (42 Days Prior Approval Notification Process)
19 days left to comment
Work to trees · usually decided quickly and rarely affects neighbours
T1- Polar Tree - reduction on a large poplar located in the back garden of their property in a Westerly direction. This is part of the trees ongoing maintenance, to reduce weight and make it safe/ensure it does not outgrow its position and was last completed January 2021. The client proposes a reduction off the top of 7m and 3m off the sides. The tree is currently 28m high and 9m wide and will be 21m high and 6m wide following the proposed works.
A follow-up to an existing permission · the principle is already approved, so only the detail is under consideration
Single storey rear extension (max 4.5m deep and max 3.78m high) (42 Days Prior Approval Notification Process)
18 days left to comment
Work to an existing home, single-storey
Single storey (Max 6m deep and Max 3m high) rear extension (42 days Prior Notification Process)
19 days left to comment
A follow-up to an existing permission · the principle is already approved, so only the detail is under consideration
Single storey rear extension (max 6m deep and max 3.9m high) (42 Days Prior Approval Notification Process)
18 days left to comment
A planning application
5DD T1- Tree falling onto our house, causing immediate danger to the building and the residents. Needs immediate removal, rear garden at end .
Work to trees · usually decided quickly and rarely affects neighbours
T105&106 White Poplar - Formative pruning crown reduction required - reduce the height 4-5m - reduce the lateral growth 4m to reshape and balance crown T98-104 Lime x 6 (Tilia spp) - Reduce back to previous reduction points (re-pollard) equating to a reduction of 3-4m all round T111 White Poplar - Formative pruning crown reduction required- reduce the height 4m- reduce the lateral growth 3-4m to reshape and balance crown T189/203/205 Laurel x 3 (Prunus spp) - Ttrim back into line with the rest of the mixed hedgerow T184 Hornbeam x 1 (Carpinus betulus) - cut back 1.5m so no longer obscuring security camera T126 Lombardy Poplar - Reduce all round back to previous reduction points (re-pollard) equating to a reduction of 6m T120 London Plane x 1 (Platanus x hispanica)- Cut back overlong branch overhanging Uxbridge Road by 2.5m (currently hitting buses) - cut back branch growing into neighbouring ash tree by 2m- cut back from street light- lift canopy all round to 3m.5m T117 Turkey Oak x 1 (Quercus cerris) - Cut back from road and street light by 1.5m- lift all round to 3m T179 Prunus spp x 1 - Lift canopy all round to 3m
Work to trees · usually decided quickly and rarely affects neighbours
T74 Lime x 9 (Tilia spp) - Reduce back to previous reduction points (re-pollard) equating to a reduction of 5-6m T42 Lime x 1 (Tilia spp)- strip epicormic growth up to 5m T81 Lombardy Poplar x 1 (Populus nigra 'Italica') - Reduce all round back to previous reduction points (re-pollard) equating to a reduction of 10m T82 Elder x 1 (Sambucus nigra) - Lift all round to 2m T87 Lime x 1 (Tilia spp)- lift to 5m by removing basal growth and trunk epicormic growth T84a Lime x 1 (Tilia spp) - Crown reduction- reduce the height 3.5m back to previous reduction points- reduce the lateral growth 2-3m to suitable growth points T85 Lime x 1 (Tilia spp) - Lift to 3m by removing epicormic growth Pounds Sterling 80.00 T86 Lombardy Poplar x 1 (Populus nigra 'Italica'). - Reduce all round back to previous reduction points (re-pollard) equating to a reduction of 10m Lime x 1 (Tilia spp) - Llift all round to 3.5m T108 to 10 Lime x 3 (Tilia spp) - Reduce all round back to previous reduction points (re-pollard)
Work to trees · usually decided quickly and rarely affects neighbours
T1 - Holm Oak (Quercus), crown reduce the neighbouring side at no.50, back to approx. 1.0m beyond the front garden fence line. Additionally, clear the house side at no.48, reducing the branches back to previous points of reduction, allowing the guttering approx 1.0m of clearance. **T2, T3 and T4 Are situated in the neighbouring property at no.46 - we have uploaded the written consent from our client at no.48 from her neighbour at no.46.** T2 - Sycamore (Acer), on the lowest limb, remove the branch overhanging the building, back into the first 'V'. T3 - Ash (Fraxinus) situated in the garden of no.46, crown reduce the lateral branches overhanging the garden at no.48 by approx. 3.0m. These works are recommended in order to reduce the weight and ultimate risk of limb failure. T4 - Lime (Tilia), crown lift the 3 lowest limbs to elevate the tree.
Work to trees · usually decided quickly and rarely affects neighbours
TPO005 T1 & T2 - 2 Lime (Tilia spp.) - Re-pollard both trees back to the established previous pruning points, removing approximately 1.5-2.0m of the current regrowth from the height and lateral spread, subject to the location of the historic pollard heads. Retain the existing pollard framework and avoid cutting beyond the established previous reduction points. Crown lift both trees to provide approximately 2.5m clearance above the adjoining pedestrian footpath, by selectively removing or shortening low secondary branches only. Remove any dead, damaged or crossing branches encountered during the works. Reason: Routine management of previously pollarded Lime trees; to contain crown dimensions, maintain the established pruning regime and provide suitable clearance above the adjoining pedestrian footpath. T3 - Horse Chestnut (Aesculus hippocastanum) Crown reduce the tree by approximately 2.0-2.5m from the height and lateral spread, pruning back to suitable secondary growth points and maintaining a balanced, natural crown form. The finished crown dimensions should be approximately 4-5m smaller in overall diameter than existing. Crown thin by up to 20%, concentrating on selective removal of secondary growth throughout the crown without creating excessive internal voids or removing significant structural limbs. Crown lift to provide approximately 4.0m clearance above ground level, through selective removal or shortening of lower secondary branches. Remove all deadwood throughout the crown. Reason: General crown management to reduce overall crown dimensions and end-weight, improve crown structure and maintain appropriate clearance beneath the tree.
A planning application
5DDD T1 Conifer Fell to ground level. Tree is dead.
Work to trees · usually decided quickly and rarely affects neighbours
T1 - T2 Lawson Cypress x2 x2 Cypress trees growing close to the property. Concern that the trees have caused cracks in the house. Fell to ground level in sections and remove from site.